Connect Tarp shade |
Post Reply | Page <12 |
Author | |
mcarter
Senior Member Joined: 12 Apr 2017 Location: Greenbrier, TN Status: Offline Points: 239 |
Post Options
Thanks(0)
|
+1 to Marwayne
|
|
Mike Carter
2015 178 |
|
mcarter
Senior Member Joined: 12 Apr 2017 Location: Greenbrier, TN Status: Offline Points: 239 |
Post Options
Thanks(0)
|
Oliver,
No keder welt at Lowes, buy the 13mm from Amazon, or use the interweb for another source. I GOOGLED keder welt and got all kinds of sources, even hangers if you want to go that route.
|
|
Mike Carter
2015 178 |
|
Oliver
Senior Member Joined: 23 Mar 2018 Status: Offline Points: 321 |
Post Options
Thanks(0)
|
Can you give me a link? 11mm is the biggest I can find! Also, I was planning on using a plastic tarp with grey on one side and brown on the other I found at Home Depot. I might use canvas if I could find something lightweight and waterproof, but what I've found so far is heavy canvas.I'm thinking the lightweight plastic might be best? And the hangers, they don't say what the diameter is on the ball end that goes in the rail?
|
|
mcarter
Senior Member Joined: 12 Apr 2017 Location: Greenbrier, TN Status: Offline Points: 239 |
Post Options
Thanks(0)
|
Try this, call them and tell them what you are trying to do:
|
|
Mike Carter
2015 178 |
|
Oliver
Senior Member Joined: 23 Mar 2018 Status: Offline Points: 321 |
Post Options
Thanks(0)
|
A guy from that company, Keder solutions, emailed and told me most people he works with for what I described go with 11mm. That is what I told you appears to be the biggest on Amazon...?
|
|
mcarter
Senior Member Joined: 12 Apr 2017 Location: Greenbrier, TN Status: Offline Points: 239 |
Post Options
Thanks(0)
|
Good info, Thanks Oliver.
|
|
Mike Carter
2015 178 |
|
Oliver
Senior Member Joined: 23 Mar 2018 Status: Offline Points: 321 |
Post Options
Thanks(0)
|
I was looking at Keder Solutions website again and looking at the keder hangers. Does anybody have any experience with those? It looks like one end will slide into the keder rail, and the other end looks like it grips the tarp. I would think that end would attach to the grommits??
|
|
Oliver
Senior Member Joined: 23 Mar 2018 Status: Offline Points: 321 |
Post Options
Thanks(0)
|
Talked with R-pod parts lady Diana Norris. She was very nice and accommodating.
She's sending me a kit to repair the place where I took the sink out. Reasonably priced. She also said the smaller keder I have should fit the later black keder rail, but if it doesn't I can squeeze the opening in the rail and it will. I still want to get hangers to connect a tarp also. I will call Keder Solutions. Her no. is 574-642-3119 opt 4. |
|
mcarter
Senior Member Joined: 12 Apr 2017 Location: Greenbrier, TN Status: Offline Points: 239 |
Post Options
Thanks(0)
|
Personally I would not pinch my keder rail to accommodate a smaller welt, really limits what you can do for the sake of installing an older RDome. Your call.
|
|
Mike Carter
2015 178 |
|
Oliver
Senior Member Joined: 23 Mar 2018 Status: Offline Points: 321 |
Post Options
Thanks(0)
|
You're right mcarter, in fact I didn't do that. I did finally put up my R Dome and found the 9mm fits in the 14mm rail just fine(like she said it would). I still want to figure out how to use hangers to attach a tarp, it's quicker and easier. I will give Keder Solutions a call.
|
|
Post Reply | Page <12 |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |