Print Page | Close Window

Wheel Bearings

Printed From: r-pod Nation
Category: RpodNation Downtime and Maintenance
Forum Name: Maintenance
Forum Description: Hosting change and configuration
URL: http://www.rpodNation.com/forum_posts.asp?TID=4360
Printed Date: 28 Mar 2024 at 6:10pm
Software Version: Web Wiz Forums 11.0 - http://www.webwizforums.com


Topic: Wheel Bearings
Posted By: Road Warrior
Subject: Wheel Bearings
Date Posted: 25 Apr 2015 at 11:24pm
About how many miles before you add a couple of squirts of grease to bearings? I have a 2012 Pod with bearing buddies on it. Thanks for any help



Replies:
Posted By: Tomcamper
Date Posted: 27 Apr 2015 at 8:41am
Repack every 5000 miles and yearly squirts. After driving check wheel to see if it is too hot indicating need for grease. That should do it I think.   Tomcamper.

-------------
Tomcamper
2016 4runner
Dreampod 177

06 GMC Envoy


Posted By: Road Warrior
Date Posted: 29 Apr 2015 at 10:05pm
Thanks Tomcamper


Posted By: RandyB
Date Posted: 19 Jul 2016 at 2:02pm
FYI- I had a bearing blow out and looked like it had plenty of greese, bearing failed.

-------------
RandyB


Posted By: Tomcamper
Date Posted: 20 Jul 2016 at 7:32pm
2010 rpod 177. Greased as needed. Sat Six months for six years in cold north winter. Frozen grease and sitting in same place without moving killed the bearings which were recently replaced. Too cold and onable to move did them in!    

-------------
Tomcamper
2016 4runner
Dreampod 177

06 GMC Envoy


Posted By: Ron 184
Date Posted: 31 Jul 2019 at 3:43pm
I have a 2016 R-pod 180, taken on about 8 camping trips less than 1000 miles total. Should I look at having the bearing check yet? Not using the camper as much as I would like.


-------------
R Woodward


Posted By: mcarter
Date Posted: 31 Jul 2019 at 5:58pm
I remove tires every season, get grease gun out and apply some new grease in each wheel (while rotating), I check for leaks or bad seals.  Another thing I do is travel with infared temp sensor and I monitor the temps of the wheel bearings.  Make sure they are not getting hot.  My plan is to pull hubs next year and visual inspect the hub areas and brakes.  That would be 5th year I have owned trailer.  One thing if you are using your trailer, lets say at 12,000 miles a year, you need to do thorough inspection every season.  Every owner is different.  OR you can take to any qualified trailer shop and have the entire hub/brake assy checked and corrected if necessary.  I'm mechanically inclined and retired so I do my own work.

-------------
Mike Carter
2015 178



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.0 - http://www.webwizforums.com
Copyright ©2001-2014 Web Wiz Ltd. - http://www.webwiz.co.uk